How coronavirus influence the service industry

 

You need to interview at least 4 people (nail stylists, customer of nail salons). Don’t mention the word “interview”, talk from the interviewee’s perspective

Use third-person, you’re telling a story

4. Online sources can only be used in the first paragraph, where you introduce what is service industry and bring out some background data of the topic.

5. You need to have a headline of no more than 6 words long

6. you need to have an attractive lead.

law are volume flow rate, viscosity, length, pressure difference, and area. Before starting the measurement of permeability we should determine the length and diameter of the samples in order to get the Area by using Fractional Caliper device.

7.

During the third week of training, I have been placed in SCAl section. This section is responsible for measuring the Formation resistivity factor (capillary pressure), permeability of fluids (K_W), MICP, and CT scan
I stared the third week by measuring the permeability of fluids (K_W) this process is done by particular device which called PCRI, by using this device we can set the value of volumetric flow rate until we get satiable value of pressure with constant temperature. On the other hand, the viscosity of the fluids is measure using the Viscometer. After that Darcy law is applied to calculate the value of permeability. The Darcy law has certain limitations which have to be considered for example laminar flow, and homogenous. The idea behind this process is to determine the water and oil initial saturation.
Similarly, during the same week I also get a chance to work in MICP (mercury injection and capillary pressure), this task deal with high and low pressure (figure 2, appendix 2) also using the Archimedes principle which state that the body immersed in a fluid and buoyed up by a force. In order to get the whole volume of the sample using mercury, this process is used with a small size of samples.

Nevertheless, CT scan also was one of the tasks that assigned to me while working in SCAL section. The task include making videos of core sample, analyze the fractures, and the flow of fluids.
Another key thing to remember is flush cleaning which is also a part of SCAL section and one of the highlights task given to me during the internship. The flush cleaning is about using different solvents such as methanol (‘CH’_3 OH) and toluene ( C_7 H_8) to dissolve many organic compounds.
This process contain of two parts first to clean the sample from hydrocarbons using toluene and methanol, when the solvent is discolor that mean the sample is free of hydrocarbons, second part is to check the present

Of any salts in the sample by adding a drops of Silver Nitrate (‘AgNO’_3) if there is precipitation the sample is not clean properly.
For week four of this training another task was arranged for me, dean stark is one of the processes I worked on in fourth week. This process mainly talk about the percentage of oil and water present in the sample and how to extract it (figure 3, appendix 2).
Dean stark is one of the devices used specially to extract oil and water from samples. The solvent that is used for this process is pure toluene that has a boiling point of 110 C ”.

8.

First the toluene is hated up in certain temperature that cause the water inside the sample to evaporate after that the toluene and water vapour both condense in water cooler and the toluene in its liquid state go back into the sample to dissolve the oil inside the sample and the water in the cooler is distilled, secondly the sample will be free of water after the process is completed.
In the next step, the sample is placed in Soxhlet apparatuses in order to remove any remaining oil, and make the calculation to get the oil and water percentage.
In the last two weeks of internship, I spent my time in training myself in different departments which I have worked in and working with the lab engineers in the department.
Activates and recommendations

During my time at the Weatherford Company as a practical student there were several activities done by the Weatherford laboratory department, I have been noticing and observing every necessity details related to that. Here I will discuss about activities and propose recommendations if necessary.
In addition, all activities were carried out for various purposes in the Department and were held by professionals. To give an example of that QHSSE meetings, lectures, Radiation test of CT scan, and emergency Oil spill task.

5.1 QHSSE Meetings
To begin with, QHSSE stand for Quality, Health, Safety, Security, and Environment excellence meetings which discuss all the safety moments happen in the industry or in employee’s daily life, also is talk about how to keep the environment safe while dealing with waste, and raise the awareness of employees and their understanding in different areas of work.
5.2 Lectures
The operation manager of the department gives lectures in technical and theoretical part in several subjects once a week for all the workers in the laboratory. The lectures contain the idea behind different processes used in the laboratory also to achieve a better understanding of employees in several sections.

This question has been answered.

Get Answer
WeCreativez WhatsApp Support
Our customer support team is here to answer your questions. Ask us anything!
👋 Hi, Welcome to Compliant Papers.