PC Build and Manual (Parts 1-3) Writing Project

at
Categories
Tags

Write out how to build certain parts of a computer. I have attached (5) documents that explain what exactly needs to be done. If needed, I will send LabSim login information to help exactly narrow down what needs to be completed.

Please look at attachments to understand better of what is exactly needed!

Needs to be (3) separate products as directed in the instructions!

Instructions:

OVERVIEW
–

You will provide a comprehensive and detailed manual documenting the step-by-step process for building a computer using the components provided in LabSim 14.1 and for the Video Card only, use information in LabSim 3.12: “Build a Computer from Scratch.” The manual will be used by entry-level technicians, so it should be clear, concise, and formatted using IEEE citation style, with screenshots of each step from LabSim 14.1 and for Video Cards only, use LabSim 3.12. Your manual should be similar to step-by-step instructions on How to Change the Oil in Your Car. Note carefully how in this example, not only is each step described individually, and in detail, but also there is a visual representation of each step. You should model your submission along the same lines. Keep in mind that your manual will be used as a guide for new technicians.

The manual should not document how to complete a LabSim section; rather, it should provide detailed instructions on how to build an actual computer for a potential customer:

“Drag the motherboard from the shelf to the motherboard plate in the system case.”

“After properly grounding yourself, pick up the motherboard and place it inside the area where the motherboard will sit in the case. Align the screw holes on the motherboard with the screw holes on the case. Use appropriate screws to mount the motherboard inside the case, making sure not to scratch the surface of the motherboard.”

To learn about the required parts which must be present in your submissions, and to learn how you will be assessed on this assignment, please take a moment to review the rubrics.

The manual will be submitted in three separate parts. Part 1 addresses Sections 1-5 of the overall manual, Part 2 addresses Sections 6-10, and Part 3 addresses Sections 11-12.

PC Build & Manual Part 1: (Project 1)

1. Workspace Preparation (LabSim 2.0)
2. Installing Motherboard (LabSim 3.3)
3. Installing Power Supply (LabSim 3.2)
4. Installing CPU (LabSim 3.5)
5. Installing RAM (LabSim 3.7/3.8)

PC Build & Manual Part 2: (Project 2)

6. Installing Hard Drive (LabSim 5.2)
7. Installing Optical Drive (LabSim 5.3)
8. Installing Video Card (LabSim 3.12)
9. Connecting Monitors, Keyboard, and Mouse (LabSim 4.0)
10. BIOS Configuration (LabSim 3.10)

PC Build & Manual Part 3: (Project 3)

11. Installing Windows 10 (LabSim 10.3)
12. Configuring Critical Windows Features (10.0, 11.0 12.0, and 13.0)

COMPUTER REQUIREMENTS
–

use the motherboard provided on the shelf
appropriate power supply that support the motherboard
fastest processor possible (available on the shelf and compatible with the motherboard)
maximum memory possible in dual channel mode
single hard drive
single CD-DVD drive
single video card

MANUAL SECTIONS
–

In addition to including the sections listed below, your manual should

address the environment in which the computer build will take place. For example, what are the best practices when working in a carpeted room?
not use computer jargon. Although the manual will be used to train new technicians, it may also be used by someone with limited computer knowledge, so the manual must be easy to understand.
include explanations on methodology. For example, why is it important to use an antistatic grounding bracelet when working with the computer? Or why is it important to install memory sticks in pairs?
The 12 sections of the overall manual are as follows:

Workspace Preparation (LabSim 2.0)
Installing Motherboard (LabSim 3.3)
Installing Power Supply (LabSim 3.2)
Installing CPU (LabSim 3.5)
Installing RAM (LabSim 3.7/3.8)
Installing Hard Drive (LabSim 5.2)
Installing Optical Drive (LabSim 5.3)
Installing Video Card (LabSim 3.12)
Connecting Monitors, Keyboard, and Mouse (LabSim 4.0)
BIOS Configuration (LabSim 3.10)
Installing Windows 10 (LabSim 10.3)
Configuring Critical Windows Features (LabSim 9.0, 10.0, 11.0, 12.0 and 13.0)

Sample Solution

Ascending a Mountain

GuidesorSubmit my paper for examination

story article sampleIf you have ever ascended a mountain, you realize that it is so energizing to acknowledge you are going to jump over one of the world’s rooftops—particularly just because when you don’t yet have the foggiest idea what’s in store or how it will resemble.

I can recollect my first climb to a peak well. It occurred around three years back, when it was harvest time, and the climate in the mountains was melancholy. My companions offered me to make a trip toward the western Carpathian Mountains, and after a brief time of dithering, I acknowledged their greeting. There was not a lot to accomplish for me at that point, so I figured a difference in encompassing would just be useful to me.

The Carpathian Mountains are not very high. On the off chance that you contrast them with, state, the Caucasian Mountains, the Carpathians look increasingly like slopes—in spite of the fact that by and large, they are around 4500 feet high. At any rate, this is all that anyone could need for a beginner, and I am happy my experience of ascending mountains began there.

Free Essay Pre-Grading for an “Offer”

GET AN EXPERT TO ANALYZE YOUR PAPER TO KNOW YOUR

Evaluation BEFORE TURNING YOUR PAPER IN.

Discover Your Grade

The slope we began our rising from was fairly slanting, in the first place. This side of the mountain was secured with a pine timberland. The trees were inconceivably high and thick; their hitched huge roots cut the ground to a great extent, shaping common strides, making strolling the landscape somewhat simpler. The air was new and clean; after around 30 minutes of climbing, we heard the sound of a stream and hurried to it for a beverage. I think it was the most delectable water in my life: it possessed an aroma like greenery and soil, was unpretentiously sweet, and was so cold and clear—dunking our recolored delivers it appeared to be just about a wrongdoing.

After about an hour of strolling, we left the woodland, and strolled along the incline, congested with bushes. The ground underneath our feet changed its shading, however we didn’t focus on it, until it began to rain marginally; after it got dangerous, and one of our companions fell along these lines, we understood we were strolling on mud. Luckily, there was a level somewhat higher, and by one way or another we figured out how to arrive at it; still, our garments were secured with mud. Further, the incline continuously got more extreme, so as opposed to strolling, we needed to climb. Rather than mud, there were for the most part stones and branches, and we could snatch the bushes close by to enable ourselves to climb. There was another little level on our way to the top; on this level, we discovered numerous wild blueberries and strawberries, which were delightful.

At the point when we eventually found a workable pace, we didn’t understand it from the outset due to the overcast and foggy climate. The downpour halted, however we could at present scarcely observe our environment, so we felt disillusioned yet by the by cheerful on account of making it to the top. We had a tea kettle and a touristic groundwork with us, so we made some hot tea, and drank it, talking about what other place we would go next time. Furthermore, out of nowhere, when we were prepared to leave, the sun by one way or another got through the mists, and cast the haze away. We were awed to see the mind blowing view beneath: green foggy valleys, obscure mountains around, and a sparkling snake of a far off waterway. Astounded, we remained there for around five minutes, before the sun holed up behind the mists once more. Be that as it may, these five minutes caused us to feel a lot more joyful than if we saw all the view while ascending the mountain.

In the next years, I ascended a few additional mountains. Despite the fact that once in a while something outrageous occurred, I despite everything feel upbeat and glad for finding more mountains firsthand. In any case, I surmise I never again had a similar inclination as at that exact second when the mists disappeared and uncovered the entire world underneath the primary mountain I cli

This question has been answered.

Get Answer
WeCreativez WhatsApp Support
Our customer support team is here to answer your questions. Ask us anything!
👋 Hi, Welcome to Compliant Papers.
Hi, how can I help?